Rubber Products

Chevron Hi-Temp Style Packing

Part Number:
2-1/4” x 1-1/8” (1001)
2-1/4” x 1-1/4” (1002)
2-1/4” x 1-1/2” (1003)
2-1/4” x 1-5/16” (1004)

Six (6) piece set split rings for easy off and on at repacking

Chevron Veraton NS-850™ Style Packing (5.5 oz)

Part Number:
2-1/4" x 1-1/8" (1011)
2-1/4" x 1-1/4" (1012)
2-1/4" x 1-1/2" (1013)
2-1/4" x 1-5/16" (1014)

Six (6) piece set Veratron NS-850™ formulation is the top APAC formulation and known for its unique ability to withstand prolonged high temperature, has been tested up to 2500 PSI and 1100 degrees and has operating range of 850 degrees Fahrenheit. Veraton NS-850™ is intended for extreme pressures and temperatures where other products fail. This product is also recognized by its unique “cinnamon” smell.

Crown Hi-Temp Rings (2 oz)

Part Number:
2-1/4" x 1-1/8" (2101)
2-1/4" x 1-1/4" (2102)
2-1/4" x 1-1/2" (2103)

Five (5) piece set split ring for easy off and on at repacking

Crown Gold Flaked Rings (2 oz)

Part Number:
2-1/4" x 1-1/8" (2111)
2-1/4" x 1-1/4" (2112)
2-1/4" x 1-1/2" (2113)

Five (5) piece set Crown rings filled with gold flaked for use as a cleaner and a heat dissipater for extended packing life.

Chevron Vee Hi-Temp Packing (4.5 oz)

Part Number:
2-1/4" x 1-1/8" (2201)
2-1/4" x 1-1/4" (2202)
2-1/4" x 1-1/2" (2203)

Four (4) piece set with interlocking soft seal

Chevron Vee Gold Flaked Packing (5.5 oz)

Part Number:
2-1/4" x 1-1/8" (2205)
2-1/4" x 1-1/4" (2206)
2-1/4" x 1-1/2" (2207)

Four (4) piece set with interlocking soft seal

Cone Hi-Temp Split Packing (1lb 6oz)

Part Number:
2-1/4" x 1-1/8" (3001)
2-1/4" x 1-1/4" (3002)
2-1/4" x 1-1/2" (3003)
2-1/4" x 1-3/4" (3004)

Four (4) cones with one (1) bottom

Cone Gold Flaked Split Packing (1lb 12oz)

Part Number:
2-1/4" x 1-1/8" (3011)
2-1/4" x 1-1/4" (3012)
2-1/4" x 1-1/2" (3013)

Four (4) cones with one (1) bottom

ProLong™ Hi-Temp Chevron Split Packing w/ Double Stepped Bottom

Part Number:
3-3/8" x 1-1/8" (4001)
3-3/8" x 1-1/4" (4002)
3-3/8" x 1-1/2" (4003)

APAC ProLong™ packing designed to serve all cone style packing applications and are interchangeable with all manufacturers’ stuffing boxes that utilize cone style packings. APAC ProLong™ packing utilize a unique double stepped design on the bottom lower follower that results in significantly increased packing compression stability.

ProLong™ Hi-Temp Chevron Split Packing w/ Cone Bottom

Part Number:
3-3/8" x 1-1/8" (4011)
3-3/8" x 1-1/4" (4012)
3-3/8" x 1-1/2" (4013)

Eight (8) piece set with cone style bottom will replace most cone type packing

ProLong™ Gold Flake Chevron Split Packing w/ Cone Bottom

Part Number:
3-3/8" x 1-1/8" (4021)
3-3/8" x 1-1/4" (4022)
3-3/8" x 1-1/2" 4023)

Eight (8) piece set with cone style bottom will replace most cone type packing

Ratigan Gold Flake Style Packing

Part Number:
1-1/8" (5020)
1-1/4" (5021)
1-1/2" (5022)

Split for easy off and on repacking APAC 5000™ Series and 176 stuffing box

APAC Hi-Temp Boot Adapter

Part Number:
2-1/4" (5004)

For use with any insert packing with 2-1/4″ OD such as Chevron Hi – Temp style packing; Chevron Veraton NS-850™ style packing; Crown Hi – Temp rings; Crown Gold Flake rings; Crown Vee Hi – Temp packing; or Crown Vee Gold Flake packing.

APAC Hi-Temp Type Rubber

Part Number:
1-1/8" (5010)
1-1/4" (5011)
1-1/2" (5012)
1-5/6" (5013)

For use in APAC 5000™ Series and 176 stuffing box.

APAC Hi-Temp Ram Shutoff Rubber

Part Number:
1-1/8" (5101)
1-1/4" (5102)
1-1/2" (5103)

For use in APAC 5000™ Series and 176 stuffing box

APAC Hi-Temp BOP Ram

Part Number:
5/8" x 1-1/4" (5611)
1-1/2" (5613)

For use in APAC 5000™ Series and 212 BOP

Ram with O-Ring Seal

Part Number:
1-1/8" x 1-1/4" (6501)
1-1/2" (6502)
Solid (6503)

For use in Fig “G” Steam-Rated Stuffing Box

O-Ring for Ram and Lower Body

Part Number:
Ram (6510)
Lower (6511)

For use in Fig “G” Steam-Rated Stuffing Box

O-Ring for Double Pack Stuffing

Part Number:
DPSB O-Ring (6818)

For use in APAC 6000™ Series Double Packing Stuffing Box.

BOP Ram

Part Number:
1-1/8" (9010)
1-1/4" (9011)
1-1/2" (9012)

With reinforced metal slot for stem. Use in APAC 9000 ™ Series and HP-150 BOP

Baffle Disk

Part Number:
65D (8001)
75D (8001)
80D (8002)
90D (8003)

For Wheathly HP 125M. Choice of four durometers

PGSR (Tubing Stripper Rubbers)

Part Number:
2-3/8" (9100)
2-7/8" (9101)
3-1/2" (9102)
4-1/2" (9103)

Pipe Wiper

Part Number:
2-3/8", 2-7/8" OD (9120)